CompactStat2

La evolución del análisis Electroquímico Portátil de Alta Resolución

Portabilidad de Alta Gama para ensayos electroquímicos

El CompactStat es un potencióstato de alta gama que ofrece las ventajas de operación alimentada por USB. Sin necesidad de una fuente de alimentación adicional, se puede alimentar fácilmente desde el puerto USB de un laptop o PC, lo que lo convierte en un compañero perfecto tanto para el laboratorio como para el trabajo de campo.

Su excepcional resolución de medición de 24 bits le otorga un nivel único de medición y control. Entre sus muchas aplicaciones se encuentran la corrosión, electroquímica analítica, nanoelectroquímica, bioelectroquímica y ensayos de baterías / celdas de combustible / electrolizadores.

Request a quotation

Alimentado por USB

Ensures full functionality in the field without the need for an external power source, powered directly from a laptop.

Portable and lightweight design

With a small footprint of 26 x 12 x 6.5 cm and a weighting less than 600g, it is a truly high specification potentiostat for researchers on the move.

High sensitivity current ranges

3 additional high sensitivity current ranges ±100pA to ±10mA for the very small signal adquisition.

Peripheral I/O Capabilities

Several peripheral analog/digital I/O options for compatibility with various Ivium modules and peripherical devices.

Integrated EIS up to 3MHz

Includes a built-in enhanced impedance analyzer FRA/EIS with an Electrochemical Impedance Spectroscopy range of 10µHz to 3MHz.

Exceptional Measurement resolution

The 24 bit resolution of the IviumStat enhances its capability to perform highly accurate and detailed measurements, crucial for sophisticated electrochemical research.

High Data Acquisition Rate

Acquisition up to 100,000 points/s (stored in instrument memory), with a minimum interval time: 10µs (0.125µs resolution) and a applicable scanrates: 1µV/s to 10,000V/s

Specifications

Model	standard	10800	20250	10030
Current compliance	±30mA	±800mA	±250mA	±30mA
Maximum compliance voltage	±10V	±10V	±20V	±100V
Maximum applied voltage	±10V	±10V	±20V	±100V
Electrode connections	4; WE, CE, RE, S (and GND) with 4mm banana plugs	4; WE, CE, RE, S (and GND) with 4mm banana plugs	4; WE, CE, RE, S (and GND) with 4mm banana plugs	4; WE, CE, RE, S (and GND) with 4mm banana plugs
Potentiostat bandwidth	>3MHz	>3MHz	>3MHz	>3MHz
Stability settings	High Speed, Standard and High Stability	High Speed, Standard and High Stability	High Speed, Standard and High Stability	High Speed, Standard and High Stability
Programmable response filter	1MHz, 100kHz, 10kHz, 1kHz, 10Hz	1MHz, 100kHz, 10kHz, 1kHz, 10Hz	1MHz, 100kHz, 10kHz, 1kHz, 10Hz	1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Signal acquisition	Dual channel 18bit ADC, 300,000 samples/s	Dual channel 18bit ADC, 300,000 samples/s	Dual channel 18bit ADC, 300,000 samples/s	Dual channel 18bit ADC, 300,000 samples/s
Electrometer input impedance	>1000Gohm //<8pF	>1000Gohm //<8pF	>1000Gohm //<8pF	>1000Gohm //<8pF
Electrometer Bandwidth	>16MHz	>16MHz	>16MHz	>16MHz

Specifications subject to change.

	standard	10800	20250	10030
Analog in/out	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)
Digital input/output	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)
I-out/E-out	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential
AC-out	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation
Channel-X input, Channel-Y input	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices

Specifications subject to change.

Model	standard	10800	20250	10030
Applied current resolution	0.00013% of applied current range	0.00013% of applied current range	0.00013% of applied current range	0.00013% of applied current range
Applied current accuracy	0.2%	0.2%	0.2%	0.2%
Galvanostatic current ranges	±100pA to ±1A	±100pA to ±1A	±100pA to ±1A	±100pA to ±1A
Potential ranges	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V
Measured potential resolution	0.00001% of potential range, minimum 0.05nV	0.00001% of potential range, minimum 0.05nV	0.00001% of potential range, minimum 0.05nV	0.00001% of potential range, minimum 0.05nV
Measured potential accuracy	0.2% or 1mV	0.2% or 1mV	0.2% or 1mV	0.2% or 1mV

Specifications subject to change.

Model	standard	10800	20250	10030
Frequency range	10µHz to 3MHz	10µHz to 3MHz	10µHz to 3MHz	10µHz to 3MHz
Amplitude	0.015mV to 1.0V, or 0.03% to 100% of current range	0.015mV to 1.0V, or 0.03% to 100% of current range	0.015mV to 1.0V, or 0.03% to 100% of current range	0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset	16bit DC offset subtraction and 2 DC-decoupling filters	16bit DC offset subtraction and 2 DC-decoupling filters	16bit DC offset subtraction and 2 DC-decoupling filters	16bit DC offset subtraction and 2 DC-decoupling filters
Dynamic range	0.05nV to 10V, and 0.2aA to 30mA	0.05nV to 10V, and 0.2aA to 30mA	0.05nV to 10V, and 0.2aA to 30mA	0.05nV to 10V, and 0.2aA to 30mA

Specifications subject to change.

	standard	10800	20250	10030
Analog in/out	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)
Digital input/output	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)
I-out/E-out	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential
AC-out	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation
Channel-X input, Channel-Y input	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices

Specifications subject to change.

	standard	10800	20250	10030
Analog in/out	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)	8/2 (0 to +4V, 16bit resolution)
Digital input/output	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)	2 input (0-5V) / 3 output (0-3.3V)
I-out/E-out	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential
AC-out	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation	±0.5V sinewave 10µHz-3MHz with variable attenuation
Channel-X input, Channel-Y input	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices

Specifications subject to change.

Iviumsoft: all you need in a single suite

Ivium provides outstanding software to match every research application. IviumSoft intuitive software suite is feature-rich and is common to all of our instruments. It comprises several operation modes which offers one complete powerful and versatile package of control and analysis software, suitable for any Windows operated system.

Included applications:

IviumSoft.
CycliScan.
Multichannel Mode (MC Mode).
IviLAB.
Batch Mode.

It is free with each instrument with unlimited installs.

Explore IviumSoft

Boots your equipment?

Are you looking to expand your electrochemical analysis capabilities beyond just a potentiostat? SFTec offers a wide range of additional equipment designed to seamlessly integrate with your potentiostat, allowing you to tackle even the most complex electrochemical experiments and take your research to the next level.

Bipotentiostat

The bipotentiostat (BiStat) is an internal hardware option that enables a second working electrode (WE2) with programmable potential offset with respect to the RE or WE1.

The bipotentiostat is fully integrated in the potentiostatic Sweep and Transient methods. Its data is recorded simultaneously with the primary channel and can be represented in the same plot using a secondary axis, or in a separate plot. The maximum scanrate or minimum interval times are the same as for the primary channel.

True Linear Scan

The True Linear Scan is a hardware option that applies a smooth analog ramp, instead of the standard staircase sweep. This hardware configuration is available on all Ivium potentiostats, and can be fitted retrospectively via a software-key upgrade.

The True Linear Scan option is designed to be used in those cases where the nature and speed of the electrochemical reaction processes lead to information loss when a standard digital staircase signal is applied (fast transient behaviour, absorption, α-characteristics)

Request a quotation

Are you looking for additional equipment

Working Electrodes

EIS data analysis

RRDE
Devices

Voltammetry Cells

Voltammetry cells

Reference Electrodes

Faraday Cage & Cell Stands

Full electrochemistry line-up

Custom integration services for electrochemical devices.

Are you an state-of-the-art researcher designing unique experiments?

Or perhaps an industry professional seeking to include a potentiostat into your production or QC/QA system with customized software control?

Our integration services cater to those in need of custom interfaces for electrochemical analysers in quality control environments or those searching for the ultimate flexibility in instruments control.

Nuestra Experiencia

Nuestro equipo de expertos está comprometido a brindarle un apoyo y orientación excepcionales. Entendemos que seleccionar el equipo adecuado y las celdas de prueba puede ser un desafío, y por eso estamos aquí para ayudarle a tomar decisiones informadas.

En SFTec también nos especializamos en proporcionar celdas de prueba personalizadas adaptadas a sus requisitos únicos. Ya sea un material de electrodo especializado, un diseño de celda no estándar o una aplicación particular en mente, nuestros expertos trabajarán estrechamente con usted para hacer realidad sus ideas.

Si tiene preguntas, necesita una solución personalizada o simplemente quiere discutir sus necesidades de investigación electroquímica, no dude en ponerse en contacto con nosotros. Nuestro equipo está ansioso por ayudarle en su búsqueda de precisión y excelencia.