XP Series

The Solution for High-Power Electrochemical Analysis

High-Power with integrated impedance

The XP electrochemical workstations are high power, research grade potentiostat/galvanostat/ZRA with optional embedded EIS.

They are suitable for high current experiments like electrolysis and large battery testing with an industry leading upper EIS frequency limit of 500 kHz (compared to other high current systems).

The compliance voltage varies based on model and goes from 10 to 40 volts. The compliance current also varies depending on the model starting at 10A up to 40A.

Request a quotation

XP40

High Power Configurations

Three powerful configurations available: XP40 (±40A/±10V), XP20 (±20A/±20V), and XP10 (±10A/±40V), suitable for different high-current applications like batteries, fuel cells, and electrolysis

Wide Current Range

Exceptional measurement range from ±100pA to ±10A with automatic range selection, enabling both high-current and high-precision measurements in a single instrument

Comprehensive Software Package

IviumSoft included as standard, offering full experimental control, data analysis, and compatibility with LabVIEW, C++, and Delphi for automated operation

Expandability Options

Compatible with various modules including True Linear Scan generator, power boosters, and multiplexers, allowing system customization for specific applications

Integrated EIS Capability

Built-in high-performance Frequency Response Analyzer with range from 10µHz to 500kHz, eliminating need for external modules and providing comprehensive impedance analysis

Advanced Data Acquisition

High-speed data acquisition up to 300,000 points/second with real-time display capability of 3,000 points/second, ideal for fast transient measurements

Safety Features

Software-controlled safety limits for current and potential, protecting valuable samples and preventing hazardous situations

Complete Solution

All-in-one package including standard electrochemical techniques, integrated EIS, and full software suite, requiring no additional purchases for basic operation

Specifications

Model	XP40	XP20	XP10
Current compliance	±40A	±20A	±10A
Maximum compliance voltage	±10V	±20V	±40V
Maximum applied voltage	±10V	±10V	±10V
Electrode connections	4; WE, CE, RE, S (and GND) with 4mm banana plugs	4; WE, CE, RE, S (and GND) with 4mm banana plugs	4; WE, CE, RE, S (and GND) with 4mm banana plugs
Potentiostat bandwidth	>500kHz	>500kHz	>500kHz
Stability settings	High Speed, Standard and High Stability	High Speed, Standard and High Stability	High Speed, Standard and High Stability
Programmable response filter	1MHz, 100kHz, 10kHz, 1kHz, 10Hz	1MHz, 100kHz, 10kHz, 1kHz, 10Hz	1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Signal acquisition	Dual channel 18bit ADC, 300,000 samples/s stored in instrument memory (max. 1M datapoints)	Dual channel 18bit ADC, 300,000 samples/s stored in instrument memory (max. 1M datapoints)	Dual channel 18bit ADC, 300,000 samples/s stored in instrument memory (max. 1M datapoints)
Electrometer input impedance	>1000Gohm //<10pF	>1000Gohm //<10pF	>1000Gohm //<10pF
Electrometer Bandwidth	>5MHz	>5MHz	>5MHz

Specifications subject to change.

Model	XP40	XP20	XP10
Applied potential range	±10V, 0.08mV res.	±10V, 0.08mV res.	±10V, 0.08mV res.
Applied potential accuracy	0.2%, or 2mV	0.2%, or 2mV	0.2%, or 2mV
Current ranges	±100pA to ±10A	±100pA to ±10A	±100pA to ±10A
Measured current resolution	0.003% of current range, minimum 3fA	0.003% of current range, minimum 3fA	0.003% of current range, minimum 3fA
Measured current accuracy	20pA + 0.025% of FSR	20pA + 0.025% of FSR	20pA + 0.025% of FSR

Specifications subject to change.

Model	XP40	XP20	XP10
Applied current resolution	0.008% of applied current range	0.008% of applied current range	0.008% of applied current range
Applied current accuracy	0.2%	0.2%	0.2%
Galvanostatic current ranges	±100pA to ±1A	±100pA to ±1A	±100pA to ±1A
Potential ranges	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V	±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV, ±1V, ±4V, ±10V
Measured potential resolution	0.0008% of potential range, minimum 7nV	0.0008% of potential range, minimum 7nV	0.0008% of potential range, minimum 7nV
Measured potential accuracy	0.2% or 2mV	0.2% or 2mV	0.2% or 2mV

Specifications subject to change.

Model	XP40	XP20	XP10
Frequency range	10µHz to 500kHz	10µHz to 500kHz	10µHz to 500kHz
Amplitude	0.15mV to 2.0V, or 0.03% to 100% of current range	0.15mV to 2.0V, or 0.03% to 100% of current range	0.15mV to 2.0V, or 0.03% to 100% of current range
DC offset	16bit DC offset subtraction and 2 DC-decoupling filters	16bit DC offset subtraction and 2 DC-decoupling filters	16bit DC offset subtraction and 2 DC-decoupling filters

Specifications subject to change.

Model	XP40	XP20	XP10
Temperature input	K-type thermocouple max. 600C (-25 to 400C ±2C, >400C ±1.6%)	K-type thermocouple max. 600C (-25 to 400C ±2C, >400C ±1.6%)	K-type thermocouple max. 600C (-25 to 400C ±2C, >400C ±1.6%)
Analog in/out	2/1 (±10V, 16bit resolution, bandwidth 40kHz)	2/1 (±10V, 16bit resolution, bandwidth 40kHz)	2/1 (±10V, 16bit resolution, bandwidth 40kHz)
Digital input/output	1 input (0-5V) / 3 output (0-3.3V)	1 input (0-5V) / 3 output (0-3.3V)	1 input (0-5V) / 3 output (0-3.3V)
I-out/E-out	Analog monitor for cell current and potential	Analog monitor for cell current and potential	Analog monitor for cell current and potential
AC-out	±0.5V sinewave, 10µHz-1MHz with variable attenuation	±0.5V sinewave, 10µHz-1MHz with variable attenuation	±0.5V sinewave, 10µHz-1MHz with variable attenuation
Channel-X input, Channel-Y input	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices	±4V: to record impedance from peripheral devices

Specifications subject to change.

Model	XP40	XP20	XP10
Power requirements	100-240V, 45-65Hz, 20VA	100-240V, 45-65Hz, 20VA	100-240V, 45-65Hz, 20VA
Interfacing	USB	USB	USB
Size (w x d x h)	45 x 37 x 10cm	45 x 37 x 10cm	45 x 37 x 10cm
Weight	16kg	16kg	16kg
PC requirements	Windows 8/10/11, with free USB port	Windows 8/10/11, with free USB port	Windows 8/10/11, with free USB port

Specifications subject to change.

To be successful your content needs to be useful to your readers.

Start with the customer – find out what they want and give it to them.

Iviumsoft: all you need in a single suite

Ivium provides outstanding software to match every research application. IviumSoft intuitive software suite is feature-rich and is common to all of our instruments. It comprises several operation modes which offers one complete powerful and versatile package of control and analysis software, suitable for any Windows operated system.

Included applications:

IviumSoft.
CycliScan.
Multichannel Mode (MC Mode).
IviLAB.
Batch Mode.

It is free with each instrument with unlimited installs.

Explore IviumSoft

Boots your equipment?

Are you looking to expand your electrochemical analysis capabilities beyond just a potentiostat? SFTec offers a wide range of additional equipment designed to seamlessly integrate with your potentiostat, allowing you to tackle even the most complex electrochemical experiments and take your research to the next level.

True Linear Scan

The True Linear Scan is a hardware option that applies a smooth analog ramp, instead of the standard staircase sweep. This hardware configuration is available on all Ivium potentiostats, and can be fitted retrospectively via a software-key upgrade.

The True Linear Scan option is designed to be used in those cases where the nature and speed of the electrochemical reaction processes lead to information loss when a standard digital staircase signal is applied (fast transient behaviour, absorption, α-characteristics)

Request a quotation

Stack analyser

The StackAnalyser module allows the simultaneous recording of up to 8 differential bipolar high-ohmic voltages (e.g. pH meter), or 8 simultaneous EIS measurements up to 100kHz in addition to the primary signal. It is designed to be used in combination with an Ivium potentiostat to monitor individual cells within a stack.

The module is fully integrated in IviumSoft in which the number of channels to be measured can be selected and shown in a satellite plot to the main signal. Each channel has 2 BNC connectors for the + and – terminals (16 connectors in total) and facilitates simple BNC cables to be used which terminate in the preferred connector of the customer (user supply).

Each differential channel has high input impedance (> 10^12 Ohm) for measuring high-ohmic external voltages.

Request a quotation

Are you looking for additional equipment?

Counter Electrodes

EIS data analysis

RRDE
Devices

Voltammetry cells

Reference Electrodes

Spectro electrochem

Full Electrochemistry Line-up

Custom integration services for electrochemical devices.

Are you an state-of-the-art researcher designing unique experiments?

Or perhaps an industry professional seeking to include a potentiostat into your production or QC/QA system with customized software control?

Our integration services cater to those in need of custom interfaces for electrochemical analysers in quality control environments or those searching for the ultimate flexibility in instruments control.